- #HOW TO ACCESS APPLE SERVER REMOTELY HOW TO#
- #HOW TO ACCESS APPLE SERVER REMOTELY PASSWORD#
- #HOW TO ACCESS APPLE SERVER REMOTELY PLUS#
- #HOW TO ACCESS APPLE SERVER REMOTELY MAC#
In the Private IP Address box, enter the internal IP address of your base station.In the Public TCP Ports box, enter a 4-digit port number (e.g., 8888) that you chose.For Description, select the " Personal File Sharing" option.
#HOW TO ACCESS APPLE SERVER REMOTELY PLUS#
Click the plus sign below the Port Settings window to add a new port mapping. Disks tab: Verify " Enable file sharing" & " Share disks over WAN" are checked. Start the AirPort Utility > Select the AEBS or TC, and then, select Edit. WARNING: Accessing shares over the Internet using either AFP or SMB outside of a VPN tunnel would be considered unsecured and is NOT recommended! Use CheckIP (or equivalent) to determine your router's current Public (WAN-side) IP address. 
(Note: AFP requires that TCP port 548 be mapped.) Also, configure the AEBS or TC to have a static Private IP address so that it will always be found at the same address.
If the AEBS or TC is downstream of another router or gateway device, configure that device for port mapping/forwarding to the AEBS or TC. If the 802.11n or 802.11ac AEBS or TC is connected directly to the broadband Internet modem or combination modem/router or gateway device, verify that the device is in bridge mode, i.e., if the device provides NAT & DHCP services, disable them. 
iOS: Access will require a third-party app, like FileBrowser.
#HOW TO ACCESS APPLE SERVER REMOTELY PASSWORD#
The user name can be anything you like the password should be the disk password for your base station.
You should be prompted for your user name and password. Enter the DynDNS-provided Domain Name of the base station, followed by a colon and the Public port number that you chose from the setup steps above. From the Finder > Go > Connect to Server. Select the base station > Edit> Disks tab > Check both " Enable file sharing" & " Share disks over WAN" options are enabled. Select the base station > Edit > Internet tab > Internet Options. One DDNS-provider is DynDNS and will be assumed for the following steps. Acquire a DDNS account and dynamic global host name. Regardless of the provider, the setup instructions should be the same. Another option would be to use a different DDNS service provider, like Dynu. If you use DynDNS, you still will have two choices: 1) Use a DynDNS client on a computer running on your local network to provide the updates, or 2) Replace the AirPort base station with another manufacturer's product that has native DDNS support. 
NOTE: The DDNS-provider DynDNS, used in the setup example below, no longer supports AirPort base stations running firmware 7.6.1+ or AirPort Utility 6.1+.
#HOW TO ACCESS APPLE SERVER REMOTELY MAC#
Take Control Books: Take Control of Back to My Mac.Apple Support Article HT203907: Get help using Back to My Mac.Apple Support Article HT204618 - Set up and use Back to My Mac.
#HOW TO ACCESS APPLE SERVER REMOTELY HOW TO#
Ref: How to transition from Back to My Mac - Apple Support. As of JApple's Back to My Mac service has been discontinued. Mac running OS X Lion 10.7.5 - macOS High Sierra 10.13.6. Both must have a publicly reachable IP address, a firewall that allows remote connections, and support either the UPnP or NAT-PMP IP protocols. An AEBS or TC running 7.6.1+ firmware or a third-party router/gateway device. Using Finder, verify that you can access the AirPort Disk from the local network. The methods presented are not necessarily in any particular order. There are at least four methods to access a shared AirPort Disk over the Internet from a remote Mac or iOS device. NOTE: For the purpose of clarification, an AirPort Disk can either be an internal HDD in a Time Capsule (TC) or an external SSD/HDD attached to the USB port of either a TC or an AirPort Extreme base station (AEBS).
0 kommentar(er)
